DiSEqC Project

Contents:

Hardware
Development Tool Chain
Installing Micro Python
Python Application Code
Document Sources

Hardware

The project employees the following hardware items

A rotator (or motor) that understands DiSEqC protocol
- Jaycar LS3330 Rotator
- GRock DG160+ Rotator/DG160+.html
Rotation mechinisms

Elevation (EL) - Elevation Rotator
Azimuth (AZ) - Geared Azimuth Rotator

An MCU ESP32S3
A Touch Dislpay ILI9488-FT6236 Touch Display
Power Supply Units with 22 kHz tone generator.
- Special Purpose DiSEqC PSU STEVAL-LNBH25LS
- Breadboard DiSEqC PSU -

Development Tool Chain

Thonny development IDE on Ubuntu
MicroPython on ESP32S3
applications

Installing Micro Python

Python Application Code

EL/AZ Antenna Rotator using DiSEqC and Micropython:
(Note this repository is private during the early stages of development.
Contact secretary@bdars.org.au for more information.)

https://github.com/vk4bay/rotator-diseqc-micropython

[Top][Home]

Document Sources

Bayside District Amateur Radio Society Inc Github page:
https://github.com/vk4bay
VK4XYZ's Dropbox folder - Rotator_Controller:
https://www.dropbox.com/scl/fo/nijafnj8so2ur44j6rcnx/ALzB7Aj4aOIL2_NHC-QikPU?rlkey=8x44vtih37howqooas80geykq&e=1&st=nudvinxq&dl=0

VK4YA's BDARS Jaycar Rotator Project:
https://drive.google.com/drive/folders/1wxSTuPHc-CMnKQBTbKXAYEsZG7ldQmAn

VK4XYZ's github presentation page:
https://ukconm.github.io/website/

[Top][Home]

Glenn Lyons VK4PK
glenn@LyonsComputer.com.au
Ver:gnl20251124 - pre published v0.9